Description
Description
Part 1
Tasks for Part 1 will be completed in Weeks 1–4 and should be 1,250–1,600 words.
Quality Training Manual
This course is comprised of a series of Individual Project assignments that will contribute to a Key Assignment submission at the end of the course. Each week, you will complete a part of a Quality Control Manual, with potential use as a training support document. You will select an organization and apply your research to the development of the Quality Control Manual that is meant for the logistics and supply chain management departments.
The project deliverables are as follows:
Quality Control Manual
Use Word
Title page
Course number and name
Project name
Your name
Date
Table of Contents (TOC)
This should be on a separate page.
This should be a maximum of 3 levels deep.
If you are using an autogenerated TOC, be sure to update the fields of the TOC before submitting your project.
Section Headings
Week 1: Introduction
History of the quality management evolution
Why it is needed
Week 2: The Role of Leadership
Why it is a strategic issue
Management as a role model
New kinds of metrics
Week 3: General Quality Strategies and Tools
Establishing customer expectations
Designing quality in
Defining metrics
Mistake-proofing
Kaizen
Six Sigma
Week 4: Quality Tactics and the Logistics and Supply Chain Functions
What tools are applicable internally
What tools are applicable externally with vendors
Part 2
Tasks for Part 2 will be completed in Week 5 and will be 250–300 words.
Week 5: Roll-Out
A communication plan
Recommended sequence of steps to get personnel trained
Stakeholders on board (e.g., the vendor base, trucking companies, warehouse personnel)
The project deliverables for Week 1 are as follows:
Week 1: Introduction (250–300 words)
You will prepare an outline of the Quality Control Manual. The first part of the manual will be the Introduction.
Provide a history of the quality management evolution and why it is needed.
List and discuss 2–3 of the specific directions that companies are adopting in terms of strategic quality management.
Clearly identify the organization that your quality control manual is intended for.
Explain the evolution of and the pros and cons of such programs as Deming and Six Sigma.
With each week, you should include a minimum of 3 new cited references. As such, the references should be varied and different with each section addition. You can reuse references, but repeat references do not count toward the minimum 3 new cited references.
Unformatted Attachment Preview
3/16/24, 1:48 PM
CTU Portal: Quality Management BADM370
Assignment Details
Unit 1 – Individual Project (100 points)
Close
Due: Sun, Mar 24 | Printer Friendly Version
Description
Part 1
Tasks for Part 1 will be completed in Weeks 1–4 and should be 1,250–1,600 words.
Quality Training Manual
This course is comprised of a series of Individual Project assignments that will contribute to a Key Assignment
submission at the end of the course. Each week, you will complete a part of a Quality Control Manual, with
potential use as a training support document. You will select an organization and apply your research to the
development of the Quality Control Manual that is meant for the logistics and supply chain management
departments.
The project deliverables are as follows:
Quality Control Manual
Use Word
Title page
Course number and name
Project name
Your name
Date
Table of Contents (TOC)
This should be on a separate page.
This should be a maximum of 3 levels deep.
If you are using an autogenerated TOC, be sure to update the fields of the TOC before submitting your
project.
Section Headings
I. Week 1: Introduction
History of the quality management evolution
Why it is needed
II. Week 2: The Role of Leadership
Why it is a strategic issue
Management as a role model
New kinds of metrics
III. Week 3: General Quality Strategies and Tools
Establishing customer expectations
Designing quality in
Defining metrics
Mistake-proofing
Kaizen
Six Sigma
IV. Week 4: Quality Tactics and the Logistics and Supply Chain Functions
What tools are applicable internally
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/1/unit-assignments
1/3
3/16/24, 1:48 PM
CTU Portal: Quality Management BADM370
What tools are applicable externally with vendors
Part 2
Tasks for Part 2 will be completed in Week 5 and will be 250–300 words.
V. Week 5: Roll-Out
A communication plan
Recommended sequence of steps to get personnel trained
Stakeholders on board (e.g., the vendor base, trucking companies, warehouse personnel)
The project deliverables for Week 1 are as follows:
Week 1: Introduction (250–300 words)
You will prepare an outline of the Quality Control Manual. The first part of the manual will be the
Introduction.
Provide a history of the quality management evolution and why it is needed.
List and discuss 2–3 of the specific directions that companies are adopting in terms of strategic quality
management.
Clearly identify the organization that your quality control manual is intended for.
Explain the evolution of and the pros and cons of such programs as Deming and Six Sigma.
With each week, you should include a minimum of 3 new cited references. As such, the references should be
varied and different with each section addition. You can reuse references, but repeat references do not count
toward the minimum 3 new cited references.
Please submit your assignment.
For assistance with your assignment, please use your textbook and all course resources.
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/1/unit-assignments
2/3
3/16/24, 1:48 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/1/unit-assignments
3/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
Assignment Details
Unit 2 – Individual Project (100 points)
Close
Due: Sun, Mar 31 | Printer Friendly Version
Description
Continue working on your training manual. Complete the following tasks for your project:
Update the Quality Training Manual document title page with the new date.
Update the previously completed sections based on the instructor’s feedback.
Add the following section for Week 2:
Week 2: The Role of Leadership (300–400 words)
Research and summarize senior management’s role in successful quality improvement programs. Be
sure to use real, researched examples to demonstrate your points. The Baldrige Award site list of
recipients could be a good resource for examples.
In general, identify senior management’s specific role in these large-scale strategic quality programs?
Cheerleader? Role model? Decision maker? Resource provider? What else?
Why must firms adopt the identified roles? What is the risk of not using the roles?
Indicate how senior and middle management should derive the metrics to use to monitor and
communicate performance?
With each week, you should include a minimum of 3 new cited references. As such, the references should
be varied and different with each section addition. You can reuse references, but repeat references do not
count toward the minimum 3 new cited references.
Please submit your assignment.
For assistance with your assignment, please use your textbook and all course resources.
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/2/unit-assignments
1/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/2/unit-assignments
2/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/2/unit-assignments
3/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
Assignment Details
Unit 3 – Individual Project (100 points)
Close
Due: Sun, Apr 7 | Printer Friendly Version
Description
Continue working on your training manual. Complete the following tasks for your project
Update the Quality Control Manual document title page with the new date.
Update the previously completed sections based on the instructor’s feedback.
Add the following section for Week 3:
Week 3: General Quality Strategies and Tools (400–500 words)
Create a comparative table that shows the various definitions, risks, and value of each of the following
quality management tactics:
Establishing customer expectations
Designing quality
Defining metrics
Mistake-proofing
Kaizen
Six Sigma
If there are other tactics you would prefer to address, feel free to switch out up to two of the above with
others you find.
Be sure you are adding at least three new cited references with this submission.
Please submit your assignment.
For assistance with your assignment, please use your textbook and all course resources.
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/3/unit-assignments
1/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/3/unit-assignments
2/3
3/16/24, 1:49 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/3/unit-assignments
3/3
3/16/24, 1:50 PM
CTU Portal: Quality Management BADM370
Assignment Details
Unit 4 – Individual Project (150 points)
Close
Due: Sun, Apr 14 | Printer Friendly Version
Description
Key Assignment Draft
The Key Assignment first draft should contain material from Weeks 1–4 and should be 1,250–1,600 words.
For this unit’s assignment, you are to add the following section to your draft:
Quality Tactics and the Logistics and Supply Chain Functions (300–400 words)
Identify what tools are applicable internally and why
Identify and explain what tools are applicable externally with vendors
Include your cited references from three new sources
Quality Control Manual
This first draft represents Part 1 of the Key Assignment. You should treat it as a finished document in terms of
grammar, formatting, all necessary sections, and complete content. If you do a good enough job in the first
draft, no changes will be needed for Part 1 in the Key Assignment final draft.
This course is comprised of a series of Individual Project assignments that will contribute to a Key Assignment
submission at the end of the course. Each week, you will complete a part of a Quality Training Manual. You will
select an organization and apply your research to the development of the Quality Training Manual that is meant
for the logistics and supply chain management departments.
The project deliverables are as follows:
Quality Control Manual
Use Word
Title page
Course number and name
Project name
Your name
Date
Table of Contents (TOC)
This should be on a separate page.
This should be a maximum of 3 levels deep.
If you are using an autogenerated TOC, be sure to update the fields of the TOC before submitting your
project.
Section Headings
I. Week 1: Introduction
History of the quality management evolution
Why it is needed
II. Week 2: The Role of Leadership
Why it is a strategic issue
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/4/unit-assignments
1/3
3/16/24, 1:50 PM
CTU Portal: Quality Management BADM370
Management as a role model
New kinds of metrics
III. Week 3: General Quality Strategies and Tools
Establishing customer expectations
Designing quality in
Defining metrics
Mistake-proofing
Kaizen
Six Sigma
IV. Week 4: Quality Tactics and the Logistics and Supply Chain Functions (300–400 words)
What tools are applicable internally
What tools are applicable externally with vendors
Please submit your assignment.
For assistance with your assignment, please use your textbook and all course resources.
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/4/unit-assignments
2/3
3/16/24, 1:50 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/4/unit-assignments
3/3
3/16/24, 1:51 PM
CTU Portal: Quality Management BADM370
Assignment Details
Unit 5 – Individual Project (250 points)
Close
Due: Sun, Apr 21 | Printer Friendly Version
Description
Key Assignment Final Draft
Quality Control Manual
Part 1
Tasks for Part 1 will be completed in Weeks 1–4 and should be 1,250–1,600 words.
This final draft represents Part 1 of the Key Assignment. You should treat it as a finished document in terms of
grammar, formatting, all necessary sections, and complete content. All changes from Week 4 should be
incorporated into Part 1 of the Key Assignment final draft.
This course is comprised of a series of Individual Project assignments that will contribute to a Key Assignment
submission at the end of the course. Each week, you will complete a part of a Quality Training Manual. You will
select an organization and apply your research to the development of the Quality Training Manual that is meant
for the logistics and supply chain management departments.
The project deliverables are as follows:
Quality Control Manual
Use Word
Title page
Course number and name
Project name
Your name
Date
Table of Contents (TOC)
This should be on a separate page.
This should be a maximum of 3 levels deep.
If you are using an autogenerated TOC, be sure to update the fields of the TOC before submitting your
project.
Section Headings
I. Week 1: Introduction
History of the quality management evolution
Why it is needed
II. Week 2: The Role of Leadership
Why it is a strategic issue
Management as a role model
New kinds of metrics
III. Week 3: General Quality Strategies and Tools
Establishing customer expectations
Designing quality in
Defining metrics
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/5/unit-assignments
1/3
3/16/24, 1:51 PM
CTU Portal: Quality Management BADM370
Mistake-proofing
Kaizen
Six Sigma
IV. Week 4: Quality Tactics and the Logistics and Supply Chain Functions
What tools are applicable internally
What tools are applicable externally with vendors
Part 2
Tasks for Part 2 will be completed in Week 5 and will be 250–300 words. The project deliverables for this week
are as follows:
V. Week 5: Roll-Out
Describe the process of rolling out this new company-wide quality initiative. Pay specific attention to
the logistics and supply chain management functions. Include the following:
A communication plan
Recommended sequence of steps to get personnel trained
Stakeholders on board (e.g., the vendor base, trucking companies, warehouse personnel)
Please submit your assignment.
For assistance with your assignment, please use your textbook and all course resources.
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/5/unit-assignments
2/3
3/16/24, 1:51 PM
CTU Portal: Quality Management BADM370
https://studentlogin.coloradotech.edu/?v=28&ssid=3&cid=6#/class/322741/home/unit/5/unit-assignments
3/3
Purchase answer to see full
attachment
