Description
THE PROMPT, GUIDELINES, AND RUBRIC FOR THIS ACTIVITY IS ATTACHED BELOW.
_____________________________________________________________________________________________________
TO ACCESS THE INFOSEC MODULE TWO ACTIVITY LAB CLICK THE LINK BELOW AND LOG IN WITH THE FOLLOWING INFORMATION:
https://lab.infoseclearning.com/user/login?destina…
USERNAME: [email protected]
PASSWORD: Stormi27785! <-----(capital S every other letter is lowercase) AFTER YOU LOG IN CLICK WHERE IT SAYS "SNHU - CYB 220" THEN CLICK WHERE IT SAYS "CYB-220 Module Two Activity Guide" FROM THERE YOU CAN READ THE ACTIVITY GUIDE ON THE LEFT SIDE THEN START THE LAB ON THE RIGHT.
Unformatted Attachment Preview
CYB 220 Module Two Activity Guidelines and Rubric
Overview
GNS3 is a software package that provides a platform to virtualize network configurations. Like Packet Tracer, this tool allows you to create a sandbox area where
network configurations can be tested and honed to the specifications needed. In addition to the network configuration options that GNS3 provides, it also allows
you to access the virtual machine behind the appliance in the GNS3 environment. This assignment gives you the opportunity to explore the basic options in
GNS3. It would be in your best interest to explore the features of GNS3, as it will be an essential part of Project One, due in Module Five.
Access the GNS3 environment by navigating to the GNS3 Sandboxing – Part One lab.
Special Note: If a GNS3 appliance (i.e., workstation or server) locks and requires you to press Ctrl+Alt+Delete to log in, select the Player dropdown menu to send
the command to unlock the appliance. See the image below:
1
You are provided with the devices shown below.
2
The table below lists the network topology details for this lab.
Device
PC1_TestNetwork
PC2_TestNetwork
Server_TestNetwork
Router_TestNetwork
Network Topology
Interface
IP Address
NIC1
192.168.1.101
NIC1
192.168.2.101
NIC1
192.168.3.101
FastEthernet0/0 192.168.1.100
FastEthernet0/1 192.168.2.100
FastEthernet1/0 192.168.3.100
Subnet Mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Gateway Address
192.168.1.100
192.168.2.100
192.168.3.100
n/a
You will also need the information below.
Device
PC1_TestNetwork
PC1_TestNetwork
PC2_TestNetwork
PC2_TestNetwork
Server_TestNetwork
Usernames and Passwords
Username
Password
Student
password
Admin
Passw0rd
Student
password
Admin
Passw0rd
Server
simple
Note: This assignment requires tasks to be performed at the command line. To ping, run the command ping (for example, ping 192.168.4.105).
Prompt
Submit a Microsoft Word document containing screenshots of a completed topology and ping tests. Specifically, address the following critical elements:
I.
Create the network and submit a screenshot of the topology, which should include the configuration described below.
A. Connect two Windows PCs (labeled PC1_TestNetwork and PC2_TestNetwork) to the router and assign IP addresses as indicated in the table
provided.
B. Connect the Windows server (labeled Server_TestNetwork) to the router and assign an IP address as indicated in the table provided.
C. Configure the Cisco 3745 router (labeled Router_TestNetwork) and assign IP addresses on the interfaces as indicated in the table provided.
3
II.
Test connections using best practice methods for communications between PC1_TestNetwork and PC2_TestNetwork. Submit screenshots of ping tests
performed at the command line between devices on the network. The screenshots should show the results of using best practice methods to execute
the ping command between the following devices:
A.
B.
C.
D.
III.
From PC1_TestNetwork to PC1_TestNetwork
From PC1_TestNetwork to PC1_TestNetwork Gateway
From PC1_TestNetwork to PC2_TestNetwork Gateway
From PC1_TestNetwork to PC2_TestNetwork
Test connections for communications between the computers on the network. Submit screenshots of ping tests performed at the command line
between devices on the network. The screenshots should show the results of executing the ping command between the following devices:
A.
B.
C.
D.
E.
From PC2_TestNetwork to PC1_TestNetwork
From PC2_TestNetwork to Server_TestNetwork
From Server_TestNetwork to PC1_TestNetwork
From Server_TestNetwork to PC2_TestNetwork
From PC1_TestNetwork to Server_TestNetwork
4
Rubric
Guidelines for Submission: Submit a Microsoft Word document containing screenshots of the network topology and the results of the ping tests. Use a file name
that includes the course code, the assignment title, and your name—for example, CYB_123_Assignment_Firstname_Lastname.docx.
Critical Elements
Network: PCs
Network: Server
Network: Router
Ping Tests:
Communications
Between
PC1_TestNetwork and
PC2_TestNetwork
Ping Tests: Computers
on the Network
Proficient (100%)
Connects two Windows PCs to the router
and assigns IP addresses correctly
Connects Windows server to the router and
assigns IP address correctly
Configures the Cisco 3745 router and assigns
IP addresses correctly
Tests connections using best practice
methods for communications between
PC1_TestNetwork and PC2_TestNetwork and
submits screenshots showing all ping tests
performed at the command line
Tests connections for communications
between the computers on the network and
submits screenshots showing all ping tests
performed at the command line
Needs Improvement (70%)
Addresses “Proficient” criteria, but with
errors
Addresses “Proficient” criteria, but with
errors
Addresses “Proficient” criteria, but with
errors
Addresses “Proficient” criteria, but with
errors
Not Evident (0%)
Does not address critical element, or
response is irrelevant
Does not address critical element, or
response is irrelevant
Does not address critical element, or
response is irrelevant
Does not address critical element, or
response is irrelevant
Value
20
Addresses “Proficient” criteria, but with
errors
Does not address critical element, or
response is irrelevant
15
20
30
15
Total
5
100%
Purchase answer to see full
attachment
